Fast and effective pre-wash

Snow foam is a popular choice favoured both professionally and domestically to achieve a full, deep clean. Used before the final contact wash, the rich thick foam clings to the body of your car to penetrate and help remove the stubborn build-up of dirt and grime making shampooing your vehicle much easier. Since the grime easily slides away this also helps to protect your paintwork from scratching during the cleaning process and prevents the appearance of soapy streak marks.

pH neutral formula

While its super strength formula packs a punch, it is also pH neutral so it will not cause damage to your paintwork, or any other part of your car and can even be used on alloys, windows and mirrors.

High volumes of wax

Our formula also contains high volumes of wax, so you can not only treat your car to an effective deep clean but it will leave your paintwork with a high-gloss shine.

Coloured snow foam with fruity fragrance

Our Strawberry Milkshake foam not only smells of deliciously sweet fresh strawberries but will also create a playful pink foam!

Directions for use

• Set up your pressure washer and lance as per the manufacturer’s instructions.
• Experiment with the different settings on your lance and with the dilution rate to find your ideal level of foam. (We have found the standard flow rate of water through your pressure washer using the vertical direction on the nozzle along with the liquid flow rate adjuster turned to the maximum gives the best results, but this can vary from lance to lance)
• The amount of rich thick foam will also depend on your mix, for best results it is recommended to use a 3:1 ratio with water and snow foam but again this varies from case to case depending on your lance, pressure washer and the temperature of the water.
• Once you have found the perfect consistency generously coat the whole of your vehicle
• Leave to dwell for around 5 minutes before rinsing and following up with your regular shampoo.
• Please note, we do not recommend using coloured snow foams on white or lightly coloured cars
• We also advise against applying snow foam in hot temperatures as the high temperature of the paintwork will cause the foam to slide off the car not giving it chance to dwell and do its job effectively