Helps Maintain Perfect Water Chemistry

pH Plus is a simple yet effective pH increaser that helps you maintain a perfect water balance. Balancing your water pH in that magic 7.2-7.6 zone can be tricky at times, so you need a product you can rely on. pH Plus a highly-efficient no-nonsense formula – if your pH is too low, just drop the required amount into your water to increase it to the perfect level.

Simple to Use

This user-friendly formula couldn’t be easier to use. Just dissolve the required amount in a bucket of water and drop the solution into your hot tub.

Fast-Dissolving Formula

The fast-dissolving formula is quickly absorbed by your water. This means you can safely enter your hot tub around 30 minutes after application, so it’s ideal for last-minute pH adjustments.

Suitable for Pools and Hot Tubs

You can safely use pH Plus in any hot tub, spa, or pool. It’s a truly all-purpose water treatment chemical.

Dosage

Use 10g of pH Plus per 1000L water. For example, if your pool is 8000L, use 80g.

How to Use

• Before use, confirm your water’s pH level is below 7.2 by testing it.
• Dissolve the required amount of pH Plus granules in a clean bucket.
• Ensure your hot tub’s pumps and jets are on to ensure proper circulation before adding the dissolved granules. For best results, add immediately above the inlet.
• Allow to circulate fully.
• Test your pH and, if required, repeat the dose until your water pH is between 7.2-7.6.
• Wait at least 30 minutes before entering the water.