Trustpilot
Andris Lux Ariston 10 Litres Under Sink Unvented Water Heater 2KW, 3100306
You may also like
Product information
Specifications
Power:
2 kW
Brand:
Ariston Water Heaters
Height:
38.5 cm
Width:
36 cm
Depth:
29.8 cm
- This 10 litre under sink water heater has a 2KW electrical output compared to the standard 3KW model for areas where there is high electrical load. If you have numerous appliances in your domestic kitchen, this water heater helps keep your electrical space available for larger appliances such as washing machines and dishwashers.
- Using the knob on the front of the unit and the 'E' setting, the temperature of the water can be set and adjusted at your required temperature.
- The water heater provides 10 litres of heated water for a domestic kitchen or bathroom as well as for light commercial use. The water remains heated whilst the unit is on with very little standing heat losses for retaining the requested water temperature.
- Whilst the water heater is heating the water once it has been used, there is heating lamp symbol on the unit to advise the user of this. This avoids energy waste (the unit would have to reheat the lost water) and the user experiencing colder than expected water which can be a shock.
Frequently asked questions
Will this run a bathroom basin and kitchen sink. Does it require a specific type of tap or will it operate with standard taps. Regards Neil
The manufacturer advises this can be used for a bathroom basin and kitchen sink if they are located close together. They advise not to use it at the same time. This is also available in 15l as most kitchen sinks are 15l. It will operate with most taps.
Does this unit have to have a discharge via a tun dish if no pressure vessel is fitted?
It is recommended by Ariston to use a tundish.
1. Do you need to install a expansion vessel, Nrv and pressure reducing valve on this unit.
2. What is the minimum cold water pressure supply required for operating this unit?
An expansion vessel would be required if the distance from the stop-cock to where the water heater needs to be installed is less than 3m. A pressure reducing valve is required if the water pressure is over 6 bar. The minimum cold water pressure required to operate this water heater is 1 bar. However, we would advise you to contact a qualified tradesman to confirm your specific requirements before purchasing any water heater of this kind.
Can this unit work straight from a 13 amp socket?
This does not come supplied with a 13 amp plug and would need to be fitted by a qualified professional.
Will they run on 16 amp
The manufacturer advise using a 13 amp only and not 16 amp. This does not come supplied with a 13 amp plug and would need to be fitted by a qualified professional.
Ask one of our experts!
We aim to answer all questions as soon as possible - often within a few hours! Although please bear in mind that during busier periods it may take up to 48 hours to receive a response. We look forward to hearing from you.
| Email: | |
| Phone: | |
| Question: | |
| Business name: | |
Secure Shopping
