Damp and Stain Block

Pro-Kleen’s high-pigment damp and stain block is a fast and efficient way to cover unsightly staining and discolouration that can affect your paint finish such as watermarks, rust, smoke, mould or damp stains. The rich matte white finish can be left as is or painted over to match your room's décor.

Leaves a Protective Barrier

Not only does the spray help to flawlessly cover unsightly stains but the special formula will also create a hard-wearing and protective banner that will not only prevent stains from coming back but it will also help to protect against damp this makes it fantastic for use in rooms such as kitchens, bathrooms, hallways near exterior doors and more.

Suitable for a Range of Surfaces

This spray can be used on a wide range of surfaces including plaster, stone, concrete and painted surfaces so you can treat almost all the surfaces around your home.

Fast Drying Formula

The formula dries down quickly so treating stained surfaces does not need to be a large time-consuming chore. The formula will dry in as little as 4 hours, so you can add extra layers if needed or even re-paint that very same day.

Low Odour Formula

The formula does not produce an overpowering odour so you can work comfortably in the area and not have to worry about the entire room having an unpleasant or lingering odour.

How to Use

Shake the can well before use.

Hold the can 20-30cm away from the stained area. Spray in a sweeping motion to ensure an even coat. 

Apply 2-3 coats, allowing 10 minutes for each layer to dry.

Allow a minimum of 4 hours to dry before final decoration. Please note that high humidity and poor ventilation drying may require more time in low temperatures.