The Ultimate DIY Kit

Don’t be left short on any job with the help of the MYLEK DIY kit with their powerful cordless hammer action drill and a choice of drill bit kit – with attachments and accessories to complete a wide range of DIY jobs around the home or in a professional environment. MYLEK prides itself on delivering high-quality products that continue to provide outstanding performance – that’s why you can count on this set to provide fantastic value and reliable performance.  

MYLEK 4orce Cordless Drill

MYLEKs best-selling range of 4orce power tools is packed full of features that make them easy to use for beginners and pros alike, constructed with the finest materials they can withstand heavy-duty use without sacrificing performance. Their cordless hammer drill is no exception

Powerful Brushless Motor

This hammer drill uses a highly efficient brushless motor which offers significantly improved performance over models that use brushed motors. Since there is no energy lost due to friction these drills are much more energy-efficient allowing for the batteries to operate for up to 50% longer. The brushless motor also offers a much higher torque to weight ratio which results in an increase in the torque per watt power. On top of this brushless motors are less susceptible to mechanical wear for longer-lasting performance and improved lifetime.

Feature Packed for Outstanding Performance

The 4orce cordless hammer action drill not only offers improved performance but is packed full of features that make using your drill much easier – even for those with little to no experience. The two-gear hammer drill features a 19 + 3 torque selection that offers greater control and a variable control trigger to make adjusting the speed easier and quicker – it boasts a no-load speed between 400-1600rpm and also includes an incredibly 50Nm max torque. The keyless quick-change chuck makes switching out attachments a breeze and can use drill bits between 0.8 to 13mm in size. You can also effortlessly shift between drilling and screwing with the forward and reverse switch while the quick-stop brake ensures you are always in control.  The built-in LED work light also offers improved precision as well making it easier to work in areas with low light.  

Comfort and Ease of Use at the Forefront

Not only does this MYLEK drill offer outstanding feature-packed performance but it has been designed with comfort in mind – making it easier on beginners and helping to reduce fatigue during those long projects. The drill itself is incredibly lightweight without feeling flimsy weighing only 1.4kg. The anti-shock moulding on the body reduces the amount of impact felt helping to keep fatigue and strain at bay, the cordless power also offers increased manoeuvrability without being tied down with a cable.

Fast Charge Battery

All MYLEK 4orce power tools use the same 2000mAh Li-ion battery, making them interchangeable across the whole range – this means you have an extra supply of power on hand if you own any other products from the range. However, don't worry if you don’t as the fast charge battery means you won’t be waiting all day for your tools to charge up and thanks to the advanced no self-discharge feature these batteries don’t lose power as quickly as other batteries even while not in use.

What’s in The Box

·        MYLEK 4orce Cordless Hammer Action Drill

·        2000mAh Li-ion Battery

·        3-pin UK plug

·        Charger

·        13-piece Accessory Kit

·        Carry Case

MYLEK 4orce Drill Bit Set

The MYLEK drill bit sets are a must-have for any DIY kit – make sure you have everything you need to complete any task in one handy carry case.

Made with Highest Quality Materials

Each piece in the MYLEK drill bit range has been crafted using high-grade material including Tungten, HSS and CRV allowing them to effortlessly tackle any task with ease. These materials were specially selected for use in the drill bits as not only are they incredibly durable they also boast high shock resistance and ductility – so you can rest assured that you will get outstanding performance use after use.

Complete a Wide Range of Jobs

Thanks to their durable build the MYLEK drill bits can be used safely on a wide range of materials, so you can complete almost any job you may come across. Make short work of drilling through wood, brick, concrete blocks, metal, plastic and much more.

Complete with Handy Storage Case

Your new drill bit comes with a handy storage case to keep each part, secure, safe and well organised so you can always find what you need when you need it!  

What’s in the Box

50-piece set

·         9pcs HSS twist drill bit set: HSS4241, Titanium coated and edge ground, HRC60-63: 1.5, 2.0,2.5,3.0,3.5,4.0,4.5,5.0,6.0mm

·         5pcs woodworking drill, #45 carbon steel, black and white:4,5,6,8,10mm

·         5pcs stone drill, milled, sand blaster: shank is #45 carbon steel, Tip is tungsten carbide YG8C: 4 5 6 8 10.0mm

·         6pcs 50mm bits, CRV6150： PH2, PH3, PZ2 PZ3, SL5 SL6

·         20pcs 25mm bit, CRV6150: SL4 SL5 SL6 SL7, PH1 PH2X2 PH3 PZ1 PZ2X2 PZ3, T10 T15 T20 T25 T30, S1 S2 S3

·         3pcs Nut driver, sand blaster, 50BV30: 6,8,10.0mm magnetic bit holder

·         1pcs counter sink

56-piece set

·         5pcs screwdriver bits: material is S2 high-grade steel, finishing is sandblaster. HRC 48-51, 25mm, CRV6150:PZ0, PZ1, PZ2, PZ3, H6

·         1pcs gradient spirit level (on front of the case)

·         5pcs screwdriver bits: material is S2 high-grade steel, finishing is sandblaster, HRC 48-51, 25mm, CRV6150: PH0, PH1, PH2, PH3, T35

·         6pcs masonry drill bit sandblaster: the shaft material is #45 carbon steel, the tip material is tungsten carbide YG8C 5.0, 2x6.0, 2x8.0, 10.0mm

·         6pcs HSS4241 twist drill bits: raw material is HSS 4241, titanium coated, edge ground, 118 tip angle, HRC60-63:2, 3, 4, 5, 6, 8mm

·         5pcs Wood Working drill bits: roll forged, #45 Carbon steel, black and white 4, 5, 6, 8, 10mm

·         1pcs countersink

·         4pcs hole saw, carbon steel: 32, 38, 44, 54mm

·         1pcs hole saw arbour

·         1pcs Allen key

·         1pcs magnetic holder: shaft material is #45 carbon steel, HRC 42-48

·         20pcs screwdriver bits: material is S2 high-grade steel, finishing is sand blaster, HRC 48-51, 25mm, CRV6150: SLOTTED 3/4/5/6/7, S1/2/2/3, H3/4/5/5/6, T10/15/20/25/30/40

128-piece set

·         11pcs HSS twist drill bit, raw material is HSS 4241, Titanium coated, Edge Groud,118 tip angle, HRC60-63:1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5mm

·         5pcs woodworking drill, #45 Carbon steel roll forged, black and white: 4 5 6 8 10 mm

·         5pcs masonry drill bit, sand blaster:4.0,5.0,6.0,8.0,10.0mm, the shalf material is #45 carbon steel, the tip material is tungsten carbide YG8C 

·         9pcs nut driver: 5.0,6.0, 7.0,8.0,9.0,10.0,11.0,12.0,13.0mm, material is 50BV30, finishing: sand blaster HRC 42-48 

·         1pcs magnetic holder: shalf material is #45 carbon steel, HRC 42-48 

·         1pcs countersink: material is #45 carbon steel, HRC 42-48 

·         20pcs screw driver bits ,25mm, CRV6150: PH1x2 PH2x2 PH3, PZ1x2 PZ2x2 PZ3 ,4.0MM 5.0MM ,6.0MM, T15, T20, T25, T30, S1, S2, S3: material is CRV6150, finishing is sand blaster, HRC 48-51 

·         12pcs 50mm, screw driver bit ,50mm: PH1 PH2 PH3, PZ1 PZ2 PZ3, 4.0MM,5.0MM,6.0MM, T15, T20, T25: material is CRV6150, finishing is sand blaster, HRC 48-51 

·         3pcs flat drill: 13mm,16mm,19mm 1pcs gauge ruler 

·         60pcs wall plug

204-piece set

·         38pcs HSS 4241 drill bits, titanium coated, edge ground, DIN 338, 118 degrees, HRC 58-64:1.0x4; 1.5x4; 2.0x4; 2.5x4;3.0x3; 3.2x4; 3,5x2; 4.0x3; 4.5x2; 4.8x2; 5.0; 5.5x2; 6.0x2; 6,5;

·         14pcs Brad Point Drill Bits, C45, HRC 40-45：3.0x3 ;3.5, 4.0x3; 4,5; 5.0; 5,5; 6.0; 6,5,8.0, 10.0mm

·         5pcs Masonry drill: 4/5/6/8/10 mm                                                                                      

·         3pcs Flat wood bits, 13/16/19mm                                                                                        

·         14pcs screwdriver bits, 50 mm, CrV6150, HRC 52-55, Slotted 3/4/5/6/8mm; Phillips #1, #2, #3; PZ1, PZ2, PZ3, Star T10, T15, T20"                                                     

·         20pcs screwdriver bits, 25 mm, CrV6150, HRC 52-55 Slotted 3/5/6/8mm; Phillips #0, #1, #2, #3; Square S1, S2, S3; Star: T10, T15, T20, T25, T30, PZ0, PZ1, PZ2, PZ3                                   

·         10pcs Nut driver, 50BV30, HRC 30-50, 4/5/6/7/8/9/10/11/12/13mm                        

·         2pcs screw finders, ABS material

·         4pcs drill stopper, 3-6-8-10 mm, 

·         4pcs hole saws with arbor: 32, 38, 44, 54, 

·         1pcs hole saw adapter with drill, C45

·         1pcs counter sink

·         1pcs magnetic bit holder, size 60 mm

·         1pcs ratcheting screwdriver handle, left/right 

·         1pcs flexible drive:150mm

·         1pcs hex shank 

·         84pcs wall plugs, material PP, grey colour, different sizes assorted

Additional Information

This drill is fully CE certified / EU Batteries Directive Compliant / UN38.3 and RoHS compliant to the highest UK standards and comes with a 2-year warranty.